PMC 6 - Paarpreis The PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.

With 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.

Whether in portrait or landscape placement, the PMC6’s sophisticated DSP engine automatically adjusts the crossover, ensuring optimum tonal accuracy, phase and imaging.

The monitor can be calibrated using the rear-panel controls or with PMC’s intuitive browser-accessible SoundAlign™ software.
The PMC6 can be upgraded by adding a PMC8 SUB to create a full-range, free-standing PMC6 XBD system. Activating the ‘XBD’ DSP mode ensures the perfect marriage of the two units, creating a clean LF extension down to 25Hz.
     •    Active 2-way nearfield reference monitor with ATL™ bass loading    •    Frequency response: 39Hz - 25kHz (- 3dB @1m full space, on-axis)    •    Max. cont. SPL: 106dB @1m     •    State-of-the-art Class-D amplifiers: HF 200W, LF 200W    •    Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)    •    Digital ‘through’ output (AES3 24-bit 96kHz)    •    SoundAlign™ network control interface for single or group EQ & settings    •    Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options    •    Automatic portrait/landscape placement DSP correction    •    PMC6 + PMC8 SUB creates PMC6 XBD, with LF down to 25Hz    •    Ceiling-mount yoke allows suspension in multi-channel or immersive systems

PMC 6 XBD - Paarpreis In the case of the PMC6, the bass response of the resulting XBD monitor combination is extended from 39Hz down to 25Hz — giving genuine midfield monitor performance in a compact installation — and the speaker becomes a true three-way design. Also, since the mid-bass driver no longer handles the lowest bass frequencies, distortion is reduced, headroom is extended, and the mid-range frequencies gain extra clarity to lend vocals still greater realism and depth. It’s simple to configure the PMC6 XBD system; connect the input directly to the PMC6, and add an AES3 digital cable to carry the main monitor ‘through’ output down to the PMC8 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign™ browser-based software via the LAN connection, where both speakers appear as a single PMC6 XBD unit when linked.   3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis) State-of-the-art Class-D amplifiers: HF 200W, LF 200W, SUB(XBD) 300W Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate) Digital ‘through’ output (AES3 24-bit 96kHz) SoundAlign™ network control interface for single or group EQ & settings Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options

PMC 6-2 - Paarpreis The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.

This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.

A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.
     •    Active 3-way nearfield reference monitor with ATL™ bass loading    •    Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)    •    Max. cont. SPL: 109dB @1m     •    State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W    •    Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)    •    Digital ‘through’ output (AES3 24-bit 96kHz)    •    SoundAlign™ network control interface for single or group EQ & settings    •    Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options    •    PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom    •    Ceiling-mount yoke allows suspension in multi-channel or immersive systems

PMC 8 SUB - Stückpreis The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL™ bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Featuring one custom eight-inch long-throw bass-driver, the PMC8 SUB is powered by a single 300W Class-D amplifier and controlled by the same powerful DSP engine as our other active models. DSP facilities include sophisticated room boundary equalisation options, parametric EQ, time delay, phase inversion, and the unique XBD mode, all configured via the loudspeaker’s rear panel or the browser-based SoundAlign™ software.
     •    Active subwoofer with an 8-inch bass driver and ATL™ bass loading    •    Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)        •    Max. cont. SPL: 109dB @1m     •    State-of-the-art Class-D amplifier: 300W    •    Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)    •    Digital ‘through’ output (AES3 24-bit 96kHz)    •    SoundAlign™ network control interface for single or group EQ & settings    •    Sophisticated DSP driver protection, EQ, and delay/phase options    •    Dedicated XBD configuration mode

PMC 8-2 - Paarpreis As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.

The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.

Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.

PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.
     •    Active 3-way nearfield reference monitor with ATL™ bass loading    •    Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)    •    Max. cont. SPL: 113dB @1m    •    State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W    •    Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)    •    Digital ‘through’ output (AES3 24-bit 96kHz    •    SoundAlign™ network control interface for single or group EQ & settings    •    Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options    •    PMC8-2 + PMC8-2 SUB creates PMC8-2 XBD, with up to 6dB of additional headroom    •    Optional dedicated floor stands for PMC8-2 (40”) and PMC8-2 XBD (19”)

PMC 8-2 XBD - Paarpreis PMC’s twin cabinet format combines the PMC8-2 mid-field full-range monitor with the PMC8-2 SUB subwoofer, forming a perfectly integrated loudspeaker with the sub. Like the smaller active XBD systems, the PMC8-2 XBD configuration gains an impressive 6dB greater bass headroom than the main speaker alone. The XBD configuration delivers a supreme monitoring experience with a sense of boundless headroom and immediate visceral attack. But these qualities aren´t about sheer volume; there´s no need to monitor at high level as the full dynamic range and depth of bass remains consistent at all listening levels and for everything from dance to full scale orchestral material. The XBD format delivers superlative and effortless full-range monitoring quality in modest to larger control rooms. In an XBD configuration the audio input signal connects to the PMC8-2 monitor and is passed to the sub via the digital ‘through’ output. Once in the XBD mode the highly sophisticated DSP engines in each cabinet ensure perfect acoustic dovetailing of the two units creating an awesome performer with the option of further enhancements made with the intuitive SoundAlign™ web interface.   3-way active, twin cabinet, mid-field reference monitor with ATL™ bass loading Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis) State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2 x 400W, SUB(XBD) 2 x 400W Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate) Digital ‘through’ output (AES3 24-bit 96kHz) SoundAlign™ network control interface for single or group EQ & settings Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options Optional dedicated 19” floor stands

PMC IB1S-AIII - Paarpreis The IB1S-AIII offers reference level quality monitoring in a 3-way plug and play design. It is the ideal monitoring solution for discerning and highly critical professionals in small to medium sized control rooms for all applications including; recording, mixing, broadcast and post-production/mastering applications. No matter the material, whether it is the subtleties of vocal harmonies, strings, or extreme bottom end, their signature transparency and accuracy means that all critical decisions can be made instantly with complete confidence. Precision soft dome HF & MF drivers provide ultra-high definition and an extremely wide, natural dispersion creating a vivid soundstage over a vast listening area and with PMC’s ATL bass loading technology teamed with its 10” carbon fibre LF piston driver provides identical dynamics and deep defined bass at all monitoring levels.