ADAM Audio Sub 12 The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22 Hz. A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed. The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m). Features 12“ Subwoofer (paper) Amp. Power RMS / Music: 200 W / 300 W Frequency Response: 22 Hz - 150 Hz Max. peak SPL at 1 m: ≥115 db
ADAM Audio Sub 15 The Sub15 is an extremely powerful subwoofer capable of extending the frequency range of main and midfield monitors down to 20Hz. The sturdy 15″ woofer is made of an exceptionally rigid aluminum membrane and is driven by two powerful magnets and a 100mm voice coil. With 1000 Watts (RMS) power capability, the PWM amplifier has an efficiency factor of nearly 90%. With these performance features, the Sub15 is easily capable of handling critical musical passages with intense and sudden bass peaks without showing signs of distortion or overheating. The downward firing bass port has been specially designed with ample dimensions and rounded edges to cancel any port noise. In order to adjust the sound of the Sub15 to different room situations or individual taste, we have implemented several controls including one for volume (-60dB to +6dB) and one for the crossover frequency (50Hz – 150Hz). The satellite speakers can either be driven full range or high pass filtered at 85Hz. This allows the Sub15 to be easily integrated into a Dolby surround setup. Unfavorable phase relationships between the satellites and the subwoofer, particularly in the crossover frequency range, can be easily controlled with the supplied phase reverse switch. The Sub15 is also very flexible when it comes to connectivity: There are balanced (XLR) and unbalanced (RCA) input/output connectors to be found on the rear of the subwoofer. The Sub15 combines excellent transient response capability with an impressive low frequency performance to enable a genuinely musical reproduction experience. With a high and undistorted sound pressure output of 120dB maximum SPL at one meter, the Sub15 makes the perfect subwoofer for mid-sized and larger control rooms. Features 15.5“ Subwoofer (aluminium) Amp. Power RMS / Music: 1000 W / 1200 W Frequency Response: 20 Hz - 150 Hz Max. SPL at 1 m: ≥120 db
ATC SCS120 Pro Subwoofer The ATC SCS120 Pro Subwoofer is a high-performance 15-inch active studio subwoofer designed to extend the low-frequency response of ATC’s professional monitoring systems. It is engineered to complement ATC mid-field and main monitors while delivering exceptional dynamic range and low-distortion bass reproduction. Featuring a newly designed 375 mm low-frequency driver in a sealed cabinet and a powerful 300 W Class-A/B amplifier, the SCS120 Pro provides deep and accurate bass extension down to approximately 20 Hz. The subwoofer is designed for demanding professional environments, including large control rooms, surround monitoring systems and immersive audio installations such as Dolby Atmos. Sound Character The SCS120 Pro delivers tight, powerful and extremely accurate low-frequency reproduction. Its large 15-inch driver and sealed enclosure design provide excellent transient response and minimal distortion, ensuring that low-frequency information remains precise even at high monitoring levels. This makes the subwoofer ideal for critical mixing and mastering environments where reliable low-end translation is essential. Highlights ✔ professional 15" / 375 mm active studio subwoofer ✔ designed to integrate with ATC mid-field and main monitors ✔ powerful 300 W Class-A/B amplifier ✔ sealed-box enclosure for accurate bass control ✔ proprietary ATC SS75-375SC low-frequency driver ✔ analogue 4th-order Linkwitz-Riley crossover filters ✔ variable phase and polarity control ✔ balanced XLR inputs and outputs ✔ suitable for stereo, surround and immersive monitoring systems Typical Studio Applications ✔ extending midfield and main monitoring systems ✔ LFE monitoring in film and post-production studios ✔ Dolby Atmos and immersive audio environments ✔ mixing and mastering with extended low-frequency accuracy ✔ large control rooms and professional studios Technical Specifications ✔ speaker type: active studio subwoofer ✔ driver: 15" / 375 mm ATC SS75-375SC ✔ amplifier power: 300 W Class-A/B ✔ low-frequency extension: approx. 20 Hz (-6 dB) ✔ maximum SPL: approx. 119 dB @1 m ✔ enclosure: sealed cabinet ✔ inputs: 2× balanced XLR ✔ outputs: 2× XLR full-range outputs ✔ crossover options: multiple settings including 80 Hz ✔ dimensions: 630 × 498 × 568 mm ✔ weight: approx. 44.5 kg
ATC SCS70 Pro Subwoofer The ATC SCS70 Pro is a compact yet powerful 12-inch active studio subwoofer designed to extend the low-frequency performance of ATC’s professional monitoring systems. It delivers accurate, dynamic bass reproduction for demanding recording, mixing and post-production environments. At the heart of the system is ATC’s proprietary SS75-314SC 12-inch sub-bass driver, engineered specifically for precise reproduction of the lowest frequencies. Combined with a sealed cabinet design, it provides excellent transient accuracy and tight low-frequency control. The subwoofer is powered by a 300-watt Class-A/B MOSFET amplifier, delivering high output capability with extremely low distortion. This makes the SCS70 Pro ideal for stereo monitoring, surround sound systems and immersive audio environments such as Dolby Atmos. Sound Character The SCS70 Pro delivers tight, powerful and highly accurate low-frequency reproduction. Its proprietary driver design uses a long-gap motor structure to achieve high excursion with minimal distortion, while the sealed enclosure ensures excellent transient response and phase accuracy. The result is a clean and controlled low-end response that integrates seamlessly with professional studio monitors. Highlights ✔ professional 12" / 300 mm active studio subwoofer ✔ proprietary ATC SS75-314SC sub-bass driver ✔ 300 W Class-A/B MOSFET amplifier ✔ sealed cabinet design for precise bass reproduction ✔ analogue 4th-order Linkwitz-Riley low-pass filters ✔ selectable crossover frequencies (50 / 65 / 80 / 320 Hz) ✔ adjustable phase control (0–180°) and polarity switch ✔ balanced XLR inputs and outputs ✔ hand-built in England Typical Studio Applications ✔ extending nearfield and midfield monitoring systems ✔ LFE monitoring for film and post-production ✔ Dolby Atmos and immersive audio studios ✔ mixing and mastering with accurate low-frequency monitoring ✔ scalable multi-subwoofer installations Technical Specifications ✔ speaker type: active studio subwoofer ✔ driver: 12" / 300 mm ATC SS75-314SC ✔ amplifier power: 300 W Class-A/B ✔ frequency response: 22 Hz – 320 Hz (-6 dB) ✔ maximum SPL: 110 dB continuous / 116 dB peak @1 m ✔ low-pass filters: 50 / 65 / 80 / 320 Hz (4th-order) ✔ inputs: 2× balanced XLR ✔ outputs: 2× balanced XLR link outputs ✔ enclosure: sealed cabinet design ✔ weight: approx. 44 kg
ATC SCS70 Pro Subwoofer The ATC SCS70 Pro is a compact yet powerful 12-inch active studio subwoofer designed to extend the low-frequency performance of ATC’s professional monitoring systems. It delivers accurate, dynamic bass reproduction for demanding recording, mixing and post-production environments. At the heart of the system is ATC’s proprietary SS75-314SC 12-inch sub-bass driver, engineered specifically for precise reproduction of the lowest frequencies. Combined with a sealed cabinet design, it provides excellent transient accuracy and tight low-frequency control. The subwoofer is powered by a 300-watt Class-A/B MOSFET amplifier, delivering high output capability with extremely low distortion. This makes the SCS70 Pro ideal for stereo monitoring, surround sound systems and immersive audio environments such as Dolby Atmos. Sound Character The SCS70 Pro delivers tight, powerful and highly accurate low-frequency reproduction. Its proprietary driver design uses a long-gap motor structure to achieve high excursion with minimal distortion, while the sealed enclosure ensures excellent transient response and phase accuracy. The result is a clean and controlled low-end response that integrates seamlessly with professional studio monitors. Highlights ✔ professional 12" / 300 mm active studio subwoofer ✔ proprietary ATC SS75-314SC sub-bass driver ✔ 300 W Class-A/B MOSFET amplifier ✔ sealed cabinet design for precise bass reproduction ✔ analogue 4th-order Linkwitz-Riley low-pass filters ✔ selectable crossover frequencies (50 / 65 / 80 / 320 Hz) ✔ adjustable phase control (0–180°) and polarity switch ✔ balanced XLR inputs and outputs ✔ hand-built in England Typical Studio Applications ✔ extending nearfield and midfield monitoring systems ✔ LFE monitoring for film and post-production ✔ Dolby Atmos and immersive audio studios ✔ mixing and mastering with accurate low-frequency monitoring ✔ scalable multi-subwoofer installations Technical Specifications ✔ speaker type: active studio subwoofer ✔ driver: 12" / 300 mm ATC SS75-314SC ✔ amplifier power: 300 W Class-A/B ✔ frequency response: 22 Hz – 320 Hz (-6 dB) ✔ maximum SPL: 110 dB continuous / 116 dB peak @1 m ✔ low-pass filters: 50 / 65 / 80 / 320 Hz (4th-order) ✔ inputs: 2× balanced XLR ✔ outputs: 2× balanced XLR link outputs ✔ enclosure: sealed cabinet design ✔ weight: approx. 44 kg
ATC SCS140iW Pro Subwoofer The ATC SCS140iW Pro is a high-performance dual-12-inch active in-wall studio subwoofer designed for flush (soffit) installation in professional recording, mixing and post-production control rooms. It delivers extremely powerful and accurate low-frequency reproduction for large monitoring environments. The system features two proprietary ATC SS75-314SC 12-inch sub-bass drivers, designed and manufactured by ATC. These drivers are powered by a pair of external R1-300 Class-A/B MOSFET rack-mount amplifiers, providing high output capability and extremely low distortion. Its flush in-wall cabinet design allows seamless integration into studio front walls and is optimized to work with ATC main monitoring systems such as the SCM200AiW Pro. The SCS140iW Pro is therefore ideal for stereo, surround and immersive monitoring systems including Dolby Atmos. Sound Character The SCS140iW Pro delivers deep, controlled and highly dynamic low-frequency reproduction designed for high-resolution studio monitoring systems. Its large dual-driver configuration with ATC’s long-gap motor structure allows high excursion with minimal distortion, ensuring accurate reproduction of the lowest frequencies even at very high SPL levels. The result is a powerful yet extremely precise low-end foundation suitable for critical mixing, mastering and film production work. Highlights ✔ dual-12" active in-wall studio subwoofer ✔ 2× 12" / 314 mm ATC SS75-314SC sub drivers ✔ dual R1-300 Class-A/B MOSFET rack amplifiers ✔ designed for flush (soffit) installation in control rooms ✔ 4th-order Linkwitz-Riley low-pass filters ✔ selectable crossover frequencies: 50 / 65 / 80 / 320 Hz ✔ adjustable phase and gain controls ✔ balanced XLR inputs and link outputs ✔ ideal for stereo, surround and Dolby Atmos monitoring ✔ hand-built in England Typical Studio Applications ✔ main subwoofer for large recording studios ✔ Dolby Atmos and immersive audio monitoring ✔ film and post-production control rooms ✔ flush-mounted studio front-wall monitoring systems ✔ integration with ATC SCM main monitors Technical Specifications ✔ speaker type: dual-12" active in-wall studio subwoofer ✔ drivers: 2× 12" / 314 mm ATC SS75-314SC ✔ amplification: 2× R1-300 Class-A/B MOSFET rack amplifiers ✔ amplifier power: 300 W per channel ✔ low-frequency cutoff: approx. 22 Hz ✔ maximum SPL: 116 dB continuous / 121 dB peak @1 m ✔ low-pass filters: 50 / 65 / 80 / 320 Hz (4th-order) ✔ phase control: 0–180° ✔ inputs: 2× balanced XLR ✔ outputs: stereo link outputs ✔ dimensions: 685 × 728 × 454 mm ✔ weight: approx. 55.5 kg
ATC SCS240iW Pro Subwoofer The ATC SCS240iW Pro is a high-performance dual-15-inch in-wall studio subwoofer designed for flush (soffit) installation in large professional control rooms. It delivers extremely powerful and precise low-frequency reproduction for high-end monitoring systems and immersive audio environments. The system uses two ATC SS75-375SC 15-inch sub-bass drivers, designed and manufactured in-house by ATC. These drivers are powered by two external R1-300 Class-A/B MOSFET rack-mount amplifiers, providing high output capability and exceptionally low distortion. Its flush in-wall cabinet design is optimized to integrate with ATC’s large main monitors such as the SCM300AiW Pro, making it ideal for stereo, surround and Dolby Atmos monitoring systems in large control rooms. Sound Character The SCS240iW Pro delivers extremely deep, controlled and highly dynamic low-frequency reproduction designed for high-resolution studio monitoring systems. Its large ATC drivers use a long-gap motor structure that allows high excursion with minimal distortion, ensuring accurate reproduction of the lowest frequencies even at very high SPL levels. The result is a powerful yet extremely precise low-end foundation, ideal for critical mixing, mastering and film production work. Highlights ✔ dual-15" in-wall studio subwoofer for large installations ✔ 2× 15" / 375 mm ATC SS75-375SC sub drivers ✔ dual R1-300 Class-A/B MOSFET rack amplifiers ✔ designed for flush (soffit) mounting in control rooms ✔ selectable low-pass filters: 50 / 65 / 80 / 320 Hz ✔ adjustable phase, gain and level controls ✔ balanced XLR inputs and link outputs ✔ remote muting via footswitch ✔ ideal for stereo, surround and Dolby Atmos monitoring ✔ hand-built in England Typical Studio Applications ✔ main subwoofer for large recording studios ✔ Dolby Atmos and immersive audio control rooms ✔ film and post-production facilities ✔ flush-mounted front-wall monitoring systems ✔ integration with ATC SCM main monitors Technical Specifications ✔ speaker type: dual-15" active in-wall studio subwoofer ✔ drivers: 2× 15" / 375 mm ATC SS75-375SC ✔ amplification: 2× R1-300 Class-A/B MOSFET rack amplifiers ✔ amplifier power: 300 W per channel ✔ low-frequency cutoff: approx. 20 Hz ✔ maximum SPL: 119 dB continuous / 125 dB peak @1 m ✔ low-pass filters: 50 / 65 / 80 / 320 Hz ✔ phase control: 0–180° ✔ inputs: 2× balanced XLR ✔ outputs: stereo link outputs ✔ dimensions: 784 × 925 × 460 mm ✔ weight: approx. 69.7 kg
Barefoot Sound LFE15 – Dual-Force™ Studio Subwoofer The Barefoot Sound LFE15 is a powerful active studio subwoofer designed for professional immersive monitoring systems. Featuring Barefoot’s Dual-Force™ driver architecture and a high-power 1400-watt amplifier, the LFE15 extends monitoring systems with extremely deep and controlled low-frequency reproduction. The design uses two opposing 15-inch drivers working in perfect symmetry. This configuration cancels cabinet vibrations and delivers highly accurate bass with exceptional headroom. Sound Character The LFE15 provides deep, powerful bass extension down to 15 Hz while maintaining precise low-frequency control even at high SPL levels. Its Dual-Force™ configuration minimizes mechanical vibration and improves transient accuracy, resulting in tight and dynamic low-frequency reproduction suited for professional monitoring environments. The subwoofer can operate as a dedicated LFE channel for surround and Dolby Atmos systems or in Boost Mode to extend the low end of stereo monitoring setups. Highlights ✔ Active studio subwoofer for immersive monitoring systems ✔ Dual-Force™ design with two opposing 15" woofers ✔ 1400 W amplifier power ✔ Low-frequency extension down to 15 Hz ✔ Maximum SPL 127 dB continuous / 130 dB peak ✔ LFE mode with selectable 80 Hz or 120 Hz low-pass filter ✔ Boost mode for stereo monitoring enhancement ✔ sealed enclosure for precise low-frequency control ✔ designed to integrate with Barefoot studio monitors Technical Specifications ✔ System: active studio subwoofer ✔ Amplifier power: 1400 W ✔ Drivers: 2 × 15" Dual-Force™ woofers ✔ Frequency response: 15 Hz – 120 Hz ✔ Maximum SPL: 127 dB continuous / 130 dB peak ✔ Low-pass filter: 80 Hz / 120 Hz selectable ✔ Inputs: 2 × XLR ✔ Outputs: 2 × XLR ✔ Enclosure: sealed cabinet design ✔ Dimensions: 470 × 513 × 555 mm ✔ Weight: 49 kg
Genelec 7350 APM SAM Subwoofer Der Subwoofer 7350A aus der Genelec SAM-Serie passt sich perfekt an Ihre Abhörumgebung an. Er liefert besonders in kleinen, akustisch kritischen Räumen deutlich bessere Abhörbedingungen. Er ergänzt die 8320 und 8330 Studiomonitore, lässt sich aber auch mit den anderen Genelec DSP-Modellen kombinieren. Steuerung und automatische Einmessung erfolgt über die GLM Software. Ob Stereo- oder Surround-Konfigurationen - sie sorgt für eine hochpräzise, druckvolle Basswiedergabe. Und mit der 150 Watt Class-D-Endstufe steht ausreichend Leistungsreserve zur Verfügung. Im kompakten Gehäuse ist ein langer, strömungstechnisch optimierter Reflextunnel integriert. Gefertigt in LSE Bauweise ermöglicht er hohe Pegel am unteren Ende des Übertragungsbereichs. Selbstverständlich ohne störende Strömungsgeräusche oder Verzerrungen. Technische Daten Übertragungsbereich: 22 Hz - 120 Hz (-6 dB) Linearer Frequenzgang: ± 3 dB (25 Hz - 120 Hz) LFE Cutoff bei 150 Hz Schalldruck: 104 dB Lautsprecher: 205 mm Tieftöner Endstufenleistung: 150 Watt (Class D) Anschlüsse: 5x XLR In analog, 5x XLR Out analog, 1x XLR In LFE analog, 1x XLR In AES/EBU, 1x XLR Out AES/EBU, 2x RJ45 Abmessungen: 410 x 350 x 319 mm (HxBxT) Gewicht: 19 kg
Genelec 7360 APM SAM Subwoofer Der Genelec 7360 ist ein aktiver Subwoofer der SAM-Serie (Smart Active Monitor). SAM bedeutet, dass sich der Subwoofer an die Raumakustik anpassen kann. Dies geschieht über ein Messmikrofon am Hörplatz und die GLM-Software (Genelec Loudspeaker Manager). Es stehen 20 DSP-Filter zur Verfügung, die auch manuell editiert werden können. Störende Raumeinflüsse werden deutlich reduziert und Sie erreichen eine präzise Tiefbass-Wiedergabe. Stereo- und Surround-Setups lassen sich einfach einrichten und steuern. Über das Bass-Management übernimmt der Subwoofer automatisch alle Frequenzen unterhalb der festgelegt Übergangsfrequenz. Die angeschlossenen Lautsprecher werden somit entlastet. Sie erreichen eine bessere Auflösung und eine höhere Lautheit des gesamten Systems. Der Genelec 7360 bietet analoge Eingänge für Surround-Setups bis 7.1. Für 2.1-Setups steht ein AES/EBU-Eingang zur Verfügung. Das Multichannel-Interface 9301 ermöglicht auch über AES/EBU Setups bis 7.1. Im kompakten Gehäuse ist ein langer, strömungstechnisch optimierter Reflextunnel integriert. Gefertigt in LSE Bauweise (Laminar Spiral Enclosure) ermöglicht er hohe Pegel am unteren Ende des Übertragungsbereichs. Selbstverständlich ohne störende Strömungsgeräusche oder Verzerrungen. Technische Daten Frequenzgang: 19 Hz – 100 Hz (- 6 dB) / LFE-Kanal 19 Hz – 150 Hz DSP-Filter zur Raumanpassung (16x vollparametrisch + 4x Shelving) Anpassung der Phasenlage Dip-Schalter zur manuellen Raumanpassung Endstufenleistung (Class-D): 300 Watt Schalldruck: 109 dB SPL Lautsprecher: 250 mm (10“) Chassis Anschlüsse: 7.1 analoge XLR Ein- und Ausgänge, 1x XLR IN AES/EBU, 1x XLR OUT AES/EBU Schaltnetzteil 100-240 Volt Abmessungen: 527 x 462 x 363 mm (HxBxT) Gewicht: 27 kg
Genelec 7370 APM SAM Subwoofer Der Genelec 7370 ist ein aktiver Subwoofer der SAM-Serie (Smart Active Monitor). SAM bedeutet, dass sich der Subwoofer an die Raumakustik anpassen kann. Dies geschieht über ein Messmikrofon am Hörplatz und die GLM-Software (Genelec Loudspeaker Manager). Es stehen 20 DSP-Filter zur Verfügung, die auch manuell editiert werden können. Störende Raumeinflüsse werden deutlich reduziert und Sie erreichen eine präzise Tiefbass-Wiedergabe. Stereo- und Surround-Setups lassen sich einfach einrichten und steuern. Über das Bass-Management übernimmt der Subwoofer automatisch alle Frequenzen unterhalb der festgelegt Übergangsfrequenz. Die angeschlossenen Lautsprecher werden somit entlastet. Sie erreichen eine bessere Auflösung und eine höhere Lautheit des gesamten Systems. Der Genelec 7370 bietet analoge Eingänge für Surround-Setups bis 7.1. Für 2.1-Setups steht ein AES/EBU-Eingang zur Verfügung. Das Multichannel-Interface 9301 ermöglicht auch über AES/EBU Setups bis 7.1. Im kompakten Gehäuse ist ein langer, strömungstechnisch optimierter Reflextunnel integriert. Gefertigt in LSE Bauweise (Laminar Spiral Enclosure) ermöglicht er hohe Pegel am unteren Ende des Übertragungsbereichs. Selbstverständlich ohne störende Strömungsgeräusche oder Verzerrungen. Technische Daten Frequenzgang: 19 Hz – 100 Hz (- 6 dB) / LFE-Kanal 19 Hz – 150 Hz DSP-Filter zur Raumanpassung (16x vollparametrisch + 4x Shelving) Anpassung der Phasenlage Dip-Schalter zur manuellen Raumanpassung Endstufenleistung (Class-D): 400 Watt Schalldruck: 113 dB SPL Lautsprecher: 305 mm (12“) Chassis Anschlüsse: 7.1 analoge XLR Ein- und Ausgänge, 1x XLR IN AES/EBU, 1x XLR OUT AES/EBU Schaltnetzteil 100-240 Volt Abmessungen: 625 x 555 x 490 mm (HxBxT) Gewicht: 48 kg
Genelec 7380 APM SAM Subwoofer Der Genelec 7380 ist ein aktiver Subwoofer der SAM-Serie (Smart Active Monitoring). Er lässt sich über eine Einmessung am Hörplatz an die Raumakustik und Aufstellung anpassen. Es stehen hierfür 20 DSP-Filter zur Verfügung, die auch manuell editiert werden können. Störende Raumeinflüsse werden deutlich reduziert und Sie erreichen eine präzise Tiefbass-Wiedergabe. Auch die Phasenlage wird automatisch ermittelt und abgestimmt. Zur Einmessung und Steuerung des gesamten Setups wird das optional erhältliche GLM-Kit (Genelec Loudspeaker Manager) genutzt. Die Wiedergabe des 7380 lässt sich alternativ auch über Dip-Schalter anpassen. Über das Bass-Management übernimmt der Subwoofer automatisch alle Frequenzen unterhalb der festgelegt Übergangsfrequenz. Die angeschlossenen Lautsprecher werden somit entlastet. Sie erreichen eine bessere Auflösung und eine höhere Lautheit des gesamten Systems. Der Genelec 7380 bietet analoge Eingänge für Surround-Setups bis 7.1. Für 2.1-Setups steht ein AES/EBU-Eingang zur Verfügung. Das Multichannel-Interface 9301 ermöglicht auch über AES/EBU Setups bis 7.1. Der Bass-Reflex-Kanal für den 15"-Treiber ist in Spiralbauweise realisiert (LSE - Laminar Spiral Enclosure). Er ist strömungstechnisch optimiert und reduziert Luftgeräusche. Gemeinsam mit der leistungsstarken und effizienten 800 Watt Class-D-Endstufe ermöglicht er hohe verzerrungsfreie Pegel bis zum unteren Ende des Übertragungsbereichs. Technische Daten Frequenzgang: 16 Hz – 100 Hz (- 6 dB) / LFE-Kanal 16 Hz – 120 Hz (-6 dB) DSP-Filter zur Raumanpassung (16x vollparametrisch + 4x Shelving) Anpassung der Phasenlage Dip-Schalter zur manuellen Raumanpassung Endstufenleistung (Class-D): 800 Watt Schalldruck: 119 dB SPL Lautsprecher: 381 mm (15") Chassis Anschlüsse: 7.1 analoge XLR Ein- und Ausgänge, 1x XLR IN AES/EBU, 1x XLR OUT AES/EBU Schaltnetzteil 100-240 Volt Abmessungen: 685 x 718 x 492 mm (HxBxT) Gewicht: 69 kg
Genelec 7382 AP SAM Subwoofer Der 7382 ist Genelecs leistungsfähigster Subwoofer und eignet sich für große Abhörräume wie Misch- und Heimkinos. Er arbeitet mit 3x 15"-Treibern für druckvollen, verzerrungsfreien Tiefbass ohne Strömungsgeräusche bis zu 15 Hz als -6 dB. Möglich ist das durch Genelecs Laminar-Flow-Bassreflex-Port-Design. Der leistungsstarke 2.500 Watt Class-D-Verstärker und die Elektronik sind in ein separates RAM-Modul ausgelagert (3 HE). Die temperaturgesteuerte Kühlung ist so leise, dass der Verstärker auch im Abhörraum montiert werden kann. Zum Anschluss an den Subwoofer wird das mitgelieferte Speakon-Kabel genutzt. Für die gerade im Bassbereich entscheidende Reduzierung der Raumeinflüsse werden DSP-Filter genutzt, die über GLM (Genelec Loudspeaker Manager) eingestellt werden. Auch die Pegelanpassung zu den genutzten Monitoren und die Phasenlage werden hier abgestimmt. Technische Daten Übertragungsbereich: 15 Hz - 100 Hz (-6 dB), LFE: 15 Hz - 120 Hz (-6 dB) Schallduck: 129 dB SPL/1 m kurzzeitig im Halbraum, gemittelt 30-85 Hz Lautsprecher: 3x 15" Chassis Endstufenleistung: 2.500 Watt (Class-D) Abmessungen: 625 x 1400 x 558 mm (HxBxT) Gewicht: 145 kg Abmessungen RAM-Modul: 19", 3 HE Gewicht RAM-Modul: 11,3 kg Anschlüsse: 2.1 analoge XLR-Eingänge, 2.0 analoge XLR-Ausgänge, 1x AES IN, 1x AES OUT, 2x RJ45 für Steuernetzwerk
Genelec W371 AM SAM Subwoofer Der Genelec W371 bietet im Zusammenspiel mit den Modellen 8341, 8351 und 8361 vollkommen neue Möglichkeiten der Linearisierung des Frequenzgangs bis in den Tiefbassbereich. Möglich wird dies durch zwei Woofer: Ein 14"-Basstreiber oben auf der Frontseite in einem geschlossenen Gehäuse und ein 12"-Basstreiber unten auf der Rückseite mit einem Bass-Reflex-Design. Die beiden Treiber werden unabhängig voneinander angesteuert. Durch das relativ große Gehäuse liegen sie räumlich an verschiedenen Punkten. Somit kann noch flexibler auf die Einflüsse der Aufstellung und der Raumakustik reagiert werden. Es stehen drei verschiedene Betriebsmodi zur Auswahl: Erzeugt ein Woofer beispielsweise eine auf Reflexionen basierende Auslöschung in einem bestimmten Frequenzbereich, kann für diesen Bereich der andere Woofer genutzt werden, der diese Auslöschung nicht erzeugt (Complementary Mode). Beide Woofer können parallel genutzt werden, um eine Richtwirkung im Bass-Bereich zu erreichen (Continued Directivity Mode). Im Anti-Reflection-Mode werden beide Treiber so eingesetzt, dass gezielt Bereiche ohne Bass-Energie entstehen, um so unerwünschte Reflexionen im Raum zu reduzieren. Als "Ständer" für die "The Ones"-Modelle bietet er große Flexibilität bei der Aufstellung im Raum. Die Steuerung und Einmessung erfolgt wie bei allen SAM-Modellen über die GLM-Software. So kann er auf Wunsch deaktiviert werden, um nur das entsprechende "The Ones"-Modell zu hören. Schaltet man ihn wieder dazu, erreicht man die Wiedergabeeigenschaften eines großen Hauptmonitor-Systems - bei gleicher Basisbreite. Technische Daten Übertragungsbereich: 23 Hz – 500 Hz (-6 dB) Linearer Frequenzgang: ? 3 dB (25 Hz – 450 Hz) Schalldruck: 120 dB Lautsprecher: 14" Tieftöner an der Front, 12" Tieftöner auf der Rückseite Endstufenleistung: 2x 400 Watt (Class-D) Anschlüsse: 1x XLR In analog, 1x XLR In digital, 1x XLR Out analog, 1x XLR Out digital, 2x RJ45 Abmessungen: 1108 x 400 x 400 mm (HxBxT) mit Iso-Pod Gewicht: 61 kg Farbe: Schwarz
Guzauski Swist GSXED-18 Sub System The Guzauski-Swist GS-XED18 Sub System is available when an owner of the Guzauski-Swist GS3A Stereo 2.0 Monitoring System wishes to convert their existing 2.0 Stereo system into a 2.1 , 2.2 system or a 5.1 system. The GS-XED18 hosts a powerful 18″ Dayton Ultimax which can produce more output at the lowest frequencies for example at 20Hz around 109dB. The Ultimax has lower 3rd harmonic distortion at extreme low frequencies at high levels because less of the available Xmax is used. Plateamplifier features : Switchable ON-Auto-OFF/12V trigger. Auto on with signal applied 12V trigger turn on. 3.5mm minijack input Rotary controls: Gain, LF Adjust, Crossover, Delay Inputs: 2 x RCA summing, XLR input System Includes: 1 x XED18 SUB incl Plateamplifier Specifications Amplifier : Power Output: 1200W/4, 620W/8. 100VAC maximum output voltage, 38A maximum output current AC Power Input: 100-240VAC 50/60Hz Speaker : 18″ design for enormous air movement Over 2″ of total cone travel! 1000 watts RMS power handling Dual mirror-imaged linear spiders ensure distortion-free excursion Dual 2 ohm, 2-layer copper voice coils Large vented pole piece and under-spider venting
Neumann KH 750 DSP The Neumann KH 750 DSP is a compact, high-precision active studio subwoofer designed to extend the low-frequency performance of nearfield monitors such as the KH 80, KH 120, and KH 310. It combines a sealed cabinet design with advanced DSP processing and acts as a central bass management hub. Its integrated DSP not only handles low-end reproduction but also optimizes phase, timing, and room response across the entire monitoring system. Sound Character The KH 750 DSP delivers tight, accurate, and highly controlled bass: Low-end: deep yet precise Transients: fast and clean Integration: seamless with main monitors It’s designed for accuracy, not hype, making it ideal for professional mixing decisions. Highlights ✔ 10" active studio subwoofer with DSP ✔ sealed enclosure for maximum accuracy ✔ integrated 2.0 / 0.1 bass management ✔ MA-1 room calibration system ✔ FIR-based phase and time correction ✔ analog + digital connectivity ✔ app-based control via network ✔ optimized for Neumann KH monitor series ✔ can function as monitoring control hub
PMC 8 SUB The PMC 8 SUB is a high-performance reference-class active subwoofer designed for professional mixing, mastering, and post-production environments. As an extension for PMC’s 6 and 8 series monitors, it delivers exceptionally precise and deep low-frequency reproduction and integrates seamlessly into stereo, 2.1, and immersive monitoring systems. Utilizing PMC’s signature ATL™ (Advanced Transmission Line) technology, the PMC 8 SUB provides controlled and extended bass response without the distortion or resonance typically associated with conventional bass-reflex designs. Sound Character The PMC 8 SUB delivers deep, tight, and highly accurate low-end performance. Its ATL™ system enables smooth and phase-accurate bass reproduction down to approximately 25 Hz, revealing subtle low-frequency details while maintaining control and clarity. When paired with PMC monitors, the subwoofer not only extends low-end response but also improves overall system performance by reducing load on the main speakers—resulting in increased headroom and improved midrange clarity. Highlights ✔ high-end active studio subwoofer ✔ ATL™ (Advanced Transmission Line) bass technology ✔ extended low-frequency response down to approx. 25 Hz ✔ powerful Class-D amplification (~300 W) ✔ DSP-based processing for precise integration ✔ adjustable crossover, phase, and delay ✔ analog and digital connectivity (AES/EBU + analog) ✔ SoundAlign™ network control for calibration ✔ optimized for PMC 6 and PMC 8 monitors ✔ suitable for stereo, 2.1, 5.1, and immersive setups Typical Applications ✔ extending nearfield and midfield monitoring systems ✔ mixing and mastering with full-range low-end ✔ film, post-production, and sound design ✔ immersive audio formats (e.g. Dolby Atmos) ✔ XBD system configurations with PMC monitors Technical Specifications ✔ type: active studio subwoofer ✔ frequency response: approx. 25 Hz – 200 Hz ✔ driver: 8" woofer (ATL™) ✔ amplification: approx. 300 W (Class-D) ✔ inputs: analog (XLR), AES/EBU ✔ DSP: integrated processing (EQ, crossover, delay, phase) ✔ network: RJ45 (SoundAlign™ control) ✔ format: compact studio subwoofer ✔ weight: approx. 15–17 kg
PSI Audio A326-D-REX Studio (Dark Red) The PSI Audio A326-D-REX is a specialized reference-grade active Dynamic Range Extender designed as the perfect complement to the A226-MAIN flagship monitoring system. Handcrafted in Switzerland and built entirely with analog circuitry, it enhances low-frequency performance by improving dynamic precision, control, and transparency. Unlike traditional subwoofers, the A326-D-REX is not designed to simply extend bass response. Instead, it operates as an integrated part of a full-range monitoring system, enhancing performance in the critical 20 Hz to 100 Hz range. When combined with the A226-MAIN, it forms a phase-coherent system that behaves like a single, extremely powerful loudspeaker. Sound Character The A326-D-REX delivers maximum control, clarity, and dynamic precision in the low end. Rather than adding excessive bass, it enhances transient response, definition, and detail in the lowest frequencies. Sub-bass information becomes clearly audible and accurately analyzable. The result is a tight, powerful, and highly transparent low-frequency foundation, ensuring reliable decision-making in critical production environments. Highlights ✔ active Dynamic Range Extender (not a traditional subwoofer) ✔ optimized for PSI Audio A226-MAIN systems ✔ enhances dynamics, precision, and clarity in the low end ✔ frequency range: approx. 20 Hz – 100 Hz ✔ three symmetrically arranged 10" woofers ✔ fully analog design (no DSP) ✔ phase- and frequency-coherent integration ✔ powerful Class G/H tri-amp system (3 × 250 W) ✔ individually calibrated in anechoic chamber ✔ handcrafted in Switzerland Typical Applications ✔ extension of main monitoring systems (A226-MAIN) ✔ high-end mixing and mastering ✔ large control rooms and reference studios ✔ film, broadcast, and post-production ✔ immersive audio environments (Dolby Atmos / surround) Technical Specifications ✔ type: active dynamic range extender ✔ system: 3-way active (low-frequency extension) ✔ amplification: approx. 250 W + 250 W + 250 W ✔ frequency range: approx. 20 Hz – 100 Hz ✔ max SPL: up to approx. 126 dB peak @ 1 m ✔ drivers: 3 × 10" woofers (symmetrical) ✔ crossover frequency: approx. 80 Hz ✔ inputs: balanced XLR ✔ enclosure: bass reflex, asymmetrical cabinet ✔ dimensions: approx. 960 × 496 × 399 mm ✔ weight: approx. 80 kg
PSI Audio SUB A225-M Studio The PSI Audio SUB A225-M Studio is a high-performance reference-grade active studio subwoofer designed to extend the low-frequency response of professional monitoring systems with maximum accuracy. Handcrafted in Switzerland and built entirely with analog circuitry, it delivers exceptional linearity, phase coherence, and uncompromising bass precision. Designed as the perfect companion for the PSI Audio A-series monitors, the SUB A225-M integrates seamlessly into existing setups and extends the frequency range down to 24 Hz while maintaining the system’s overall neutrality and transparency. Sound Character The SUB A225-M Studio delivers extremely precise and controlled low-frequency reproduction. Unlike many subwoofers that emphasize sheer power, the A225-M focuses on accuracy, providing a tight, well-defined low end with excellent transient response. Even the lowest frequencies remain detailed and clearly structured, improving overall clarity and balance. The result is a deep yet controlled bass foundation that supports reliable mixing and mastering decisions. Highlights ✔ active studio subwoofer (fully analog, no DSP) ✔ extends frequency response down to approx. 24 Hz ✔ extremely accurate and linear bass reproduction ✔ seamless integration with PSI Audio monitors ✔ dual-woofer design for improved control and dynamics ✔ Class G/H amplification for efficient performance ✔ phase- and amplitude-matched with PSI speakers ✔ XLR inputs and outputs for flexible routing ✔ double-enclosure anti-resonance design ✔ individually calibrated, Swiss-made Typical Applications ✔ extending nearfield and midfield monitor systems ✔ mixing and mastering with full-range monitoring ✔ film, broadcast, and post-production (LFE channel) ✔ immersive audio setups (e.g. Dolby Atmos) ✔ high-end studio and hybrid environments Technical Specifications ✔ type: active studio subwoofer ✔ system: 1-way active ✔ amplification: approx. 200 W RMS / up to 480 W peak ✔ drivers: 2 × approx. 10" woofers ✔ frequency range: approx. 24 Hz – 100 Hz (-6 dB) ✔ max SPL: up to approx. 115 dB peak @ 1 m ✔ crossover frequency: approx. 90 Hz ✔ connections: 2 × XLR in / 2 × XLR out ✔ enclosure: double cabinet anti-resonance design ✔ dimensions: approx. 320 × 700 × 500 mm ✔ weight: approx. 35.6 kg
PSI Audio SUB A225-M Studio The PSI Audio SUB A225-M Studio is a high-performance reference-grade active studio subwoofer designed to extend the low-frequency response of professional monitoring systems with maximum accuracy. Handcrafted in Switzerland and built entirely with analog circuitry, it delivers exceptional linearity, phase coherence, and uncompromising bass precision. Designed as the perfect companion for the PSI Audio A-series monitors, the SUB A225-M integrates seamlessly into existing setups and extends the frequency range down to 24 Hz while maintaining the system’s overall neutrality and transparency. Sound Character The SUB A225-M Studio delivers extremely precise and controlled low-frequency reproduction. Unlike many subwoofers that emphasize sheer power, the A225-M focuses on accuracy, providing a tight, well-defined low end with excellent transient response. Even the lowest frequencies remain detailed and clearly structured, improving overall clarity and balance. The result is a deep yet controlled bass foundation that supports reliable mixing and mastering decisions. Highlights ✔ active studio subwoofer (fully analog, no DSP) ✔ extends frequency response down to approx. 24 Hz ✔ extremely accurate and linear bass reproduction ✔ seamless integration with PSI Audio monitors ✔ dual-woofer design for improved control and dynamics ✔ Class G/H amplification for efficient performance ✔ phase- and amplitude-matched with PSI speakers ✔ XLR inputs and outputs for flexible routing ✔ double-enclosure anti-resonance design ✔ individually calibrated, Swiss-made Typical Applications ✔ extending nearfield and midfield monitor systems ✔ mixing and mastering with full-range monitoring ✔ film, broadcast, and post-production (LFE channel) ✔ immersive audio setups (e.g. Dolby Atmos) ✔ high-end studio and hybrid environments Technical Specifications ✔ type: active studio subwoofer ✔ system: 1-way active ✔ amplification: approx. 200 W RMS / up to 480 W peak ✔ drivers: 2 × approx. 10" woofers ✔ frequency range: approx. 24 Hz – 100 Hz (-6 dB) ✔ max SPL: up to approx. 115 dB peak @ 1 m ✔ crossover frequency: approx. 90 Hz ✔ connections: 2 × XLR in / 2 × XLR out ✔ enclosure: double cabinet anti-resonance design ✔ dimensions: approx. 320 × 700 × 500 mm ✔ weight: approx. 35.6 kg