Dangerous Music MONITOR ST The Dangerous Music MONITOR ST is a reference-grade analog monitor controller designed for professional recording, mixing and mastering studios. Acting as the central hub between multiple audio sources, loudspeaker systems and cue feeds, it provides complete control over complex monitoring environments while maintaining fully transparent analog signal integrity. The MONITOR ST architecture is based on fully balanced analog circuitry with relay-switched signal paths and highly precise level control. This ensures the audio signal remains completely transparent even in complex studio configurations. In mastering applications, this allows highly repeatable monitoring levels and extremely accurate stereo imaging. The controller manages multiple stereo sources, several speaker outputs and dedicated cue and talkback functions. When combined with the optional MONITOR SR remote unit, full system control becomes available directly from the listening position while the main audio unit remains rack-mounted. ⸻ Monitoring & Workflow The MONITOR ST is designed for professional monitoring decisions in demanding studio environments. Multiple sources can be compared instantly, different speaker systems can be switched without affecting monitoring level, and essential functions such as mono, dim, mute and subwoofer integration remain immediately accessible. Its highly precise level control makes the system especially valuable for critical mixing, mastering and advanced recording workflows. ⸻ Highlights ✔ high-end analog monitor controller for professional studios ✔ fully balanced analog signal path ✔ relay-switched circuitry for maximum transparency ✔ multiple stereo inputs for different audio sources ✔ multiple speaker outputs for different monitor systems ✔ mono, dim, mute and speaker select functions ✔ integrated talkback system ✔ dedicated cue outputs for recording applications ✔ compatible with Dangerous MONITOR SR remote ✔ expandable for complex monitoring systems ✔ 19-inch rack format ⸻ Typical Studio Applications ✔ central monitoring control in mixing studios ✔ mastering monitoring with multiple speaker systems ✔ switching between multiple DAW or analog sources ✔ cue management in recording studios ✔ integration into complex hybrid monitoring environments ⸻ Technical Specifications ✔ Device type: analog monitor controller ✔ Inputs: multiple balanced stereo inputs ✔ Outputs: multiple speaker outputs + cue outputs ✔ Level control: high-precision analog attenuation ✔ Additional functions: mono, dim, mute, talkback ✔ Remote control: compatible with MONITOR SR ✔ Signal path: relay-switched, balanced ✔ Format: 19" rack / 1U

Dangerous Music CONVERT-8 The Dangerous Music CONVERT-8 is a reference-grade 8-channel digital-to-analog converter designed for professional mixing, mastering and monitoring environments. It provides precise multi-channel D/A conversion for routing DAW outputs to analog summing mixers, consoles or monitoring systems. The converter combines modern digital architecture with a meticulously tuned analog output stage designed by Chris Muth. This design delivers an open, detailed and highly musical sound ideal for hybrid production workflows. With eight analog outputs and multiple digital input formats, the CONVERT-8 supports everything from stereo monitoring to surround and immersive formats such as 5.1 and Dolby Atmos. Sound Character The CONVERT-8 is designed for extremely transparent and natural digital-to-analog conversion. Its carefully tuned analog circuitry delivers powerful low frequencies, articulate mids and open high-frequency detail. Combined with JetPLL ultra-low-jitter clocking, the converter produces a stable, fatigue-free listening experience ideal for critical mixing decisions. The result is a spacious and three-dimensional sound image that helps engineers evaluate mixes with maximum accuracy. Highlights ✔ 8-channel digital-to-analog converter for professional studios ✔ 24-bit / 192 kHz conversion ✔ audiophile analog output stage designed by Chris Muth ✔ JetPLL ultra-low-jitter clocking system ✔ digital inputs: USB, AES/SPDIF, ADAT and optical SPDIF ✔ 8 analog outputs for summing or monitoring systems ✔ automatic sample-rate detection ✔ front-panel calibration with selectable reference levels ✔ 8-channel LED metering with clip indicators ✔ Word-clock master capability ✔ compatible with Dangerous Monitor-ST/SR remote systems ✔ 1U rackmount design

Dangerous Music CONVERT-AD+ The Dangerous Music CONVERT-AD+ is a reference-grade stereo analog-to-digital converter designed for professional recording, mixing and mastering environments. It serves as the final stage before digital capture, converting analog signals into the digital domain with exceptional transparency, dynamic range and musical accuracy. Supporting 24-bit resolution and sampling rates up to 192 kHz, the converter combines state-of-the-art digital conversion with optional analog tone-shaping features, allowing engineers to capture signals cleanly or apply subtle analog character. Unique features such as Clip Guard®, X-Former transformer circuitry and the Emphasis stage allow controlled transient shaping and harmonic enhancement without introducing harsh digital artifacts. Sound Character The CONVERT-AD+ delivers extremely transparent and musical conversion. It provides a detailed sound with a powerful low-end response, clear midrange and open high-frequency detail. The integrated tone-shaping circuits can subtly increase harmonic richness and perceived loudness while preserving the natural character of the source. These qualities make it a popular choice for mix-print capture, mastering conversion and hybrid summing workflows. Highlights ✔ stereo A/D converter for recording, mixing and mastering ✔ 24-bit conversion with sampling rates up to 192 kHz ✔ very high dynamic range and extremely low distortion ✔ Clip Guard® for controlled clipping without digital artifacts ✔ X-Former transformer stage for analog coloration ✔ Emphasis circuit for harmonic enhancement ✔ two switchable stereo analog input paths ✔ precision digital metering with zoom and peak hold ✔ parallel digital outputs (AES, S/PDIF, ADAT, USB) ✔ word clock input and output ✔ 1U rackmount design

Dangerous Music LIAISON The Dangerous Music LIAISON is a high-end analog insert matrix and programmable patchbay designed for professional recording, mixing and mastering studios. It allows engineers to permanently connect multiple pieces of analog outboard gear and flexibly route them into the signal path without repatching, signal loss or interruptions. At its core are six stereo insert loops that can be assigned to two independent stereo busses. This architecture enables complex analog processing chains to be configured, compared and recalled instantly, making it particularly valuable for mastering workflows and A/B comparisons between different processing chains. The fully analog relay-switched signal path with true hard-wire bypass ensures maximum transparency. Any connected processor can be engaged, bypassed or reordered instantly via the front panel. With built-in preset memory, frequently used signal paths can be stored and recalled instantly, providing the flexibility and workflow speed modern hybrid studios require. Routing & Workflow The LIAISON dramatically simplifies complex analog routing tasks. Multiple hardware processors can remain permanently connected while their order, activation and routing can be changed instantly. This allows engineers to compare different signal chains or processing orders in real time. An integrated parallel processing bus enables latency-free blending of processed and unprocessed signals, a feature traditionally requiring large consoles or complex patchbay systems. Highlights ✔ programmable analog insert matrix for outboard processors ✔ six stereo insert loops (up to 12 mono paths) ✔ two independent stereo busses (A / B) ✔ integrated parallel processing bus ✔ relay-based true hard-wire bypass ✔ instant A/B comparison of analog processing chains ✔ four preset memories for instant recall ✔ audiophile-grade analog circuits designed by Chris Muth ✔ four monitor outputs for pre- and post-insert monitoring ✔ seamless integration with Dangerous MASTER or additional LIAISON units ✔ 19-inch rack format (2U) Typical Studio Applications ✔ mastering insert matrix for analog processing chains ✔ quick comparison of different EQ or compressor combinations ✔ routing hub for hybrid mixing setups ✔ parallel analog processing (parallel compression / EQ) ✔ efficient studio workflow without repatching hardware Technical Specifications ✔ Device type: analog insert matrix / mastering patchbay ✔ Insert loops: 6 stereo (up to 12 mono) ✔ Busses: 2 independent stereo busses ✔ Parallel processing: integrated parallel bus ✔ Presets: 4 memory slots for routing configurations ✔ Maximum level: > +28 dBu ✔ Frequency response: 10 Hz – 100 kHz (±0.1 dB) ✔ THD+N: < 0.002 % ✔ Noise floor: < −94.5 dBu (22 Hz – 22 kHz bandwidth) ✔ Input impedance: 20 kΩ ✔ Output impedance: 20 Ω ✔ Connections: balanced XLR I/O ✔ Format: 19" rack / 2U

Dangerous Music Compressor The Dangerous Music Compressor is a high-end stereo VCA compressor designed for professional mixing and mastering environments. Featuring two fully independent compression circuits, it can operate in dual-mono or stereo mode, making it highly versatile for a variety of studio workflows. Unlike many character compressors, the Dangerous Compressor focuses on extremely transparent dynamic control, allowing engineers to shape dynamics without noticeably altering the tonal balance of the source material. Its advanced sidechain architecture and intelligent dynamics control tools allow engineers to precisely manage both transient peaks and overall signal levels. Sound Character The Dangerous Compressor delivers highly transparent and musical compression. Even with significant gain reduction, the original character of the mix remains intact. Transients stay punchy and the low-end remains stable, making the unit particularly well-suited for mix-bus and mastering applications. The dual-detector design also improves stereo imaging by allowing each channel to respond independently to the incoming signal. Highlights ✔ high-end stereo VCA compressor for mixing and mastering ✔ dual-mono or stereo operation ✔ extremely transparent compression ✔ dual detector architecture for improved stereo imaging ✔ Smart Dynamics processing for peak and average detection ✔ advanced sidechain with HPF, de-esser and external insert ✔ soft- and hard-knee modes ✔ manual or auto attack/release modes ✔ true hard-wire bypass ✔ precision VU metering ✔ 2U rackmount design