AEA NUVO N8 Stereo Set Active Ribbon Microphone System The AEA NUVO N8 Stereo Set is a high-end active ribbon microphone system consisting of two carefully matched N8 microphones, delivered as a precision stereo pair. The N8 is a modern large-ribbon microphone designed specifically for far-field recording. It shares its design philosophy with the legendary AEA R88 while offering a more compact format. Its built-in active electronics provide higher output and excellent compatibility with a wide range of microphone preamps, eliminating the need for specialized high-gain ribbon preamps. The stereo set includes a stereo bar, mounts, windscreens and a protective case, making it ready for professional use. Sound Character The N8 stereo set delivers an extremely open, natural and spatially accurate sound with classic ribbon warmth and modern detail. Low-end: deep and full Mids: warm and natural Highs: smooth and never harsh Designed for far-field recording, it captures acoustic spaces with exceptional realism and depth. Even at greater distances, low frequencies remain intact and well-defined. Its figure-8 pattern makes it ideal for stereo techniques such as Blumlein and M/S. Highlights ✔ active stereo ribbon microphone set (matched pair) ✔ based on AEA R88 design philosophy ✔ optimized for far-field and ambient recording ✔ built-in active electronics (no special preamp required) ✔ large aluminium ribbon element ✔ high SPL handling (approx. 141 dB SPL) ✔ excellent transient response and smooth highs ✔ includes stereo bar, mounts and case ✔ handcrafted in the USA Typical Applications ✔ drum overheads and room microphones ✔ orchestral, choir and classical recording ✔ acoustic instruments (piano, strings, brass) ✔ stereo techniques (Blumlein, XY, AB, M/S) ✔ film sound and ambience recording ✔ high-end studio and live production Technical Specifications (per microphone) ✔ Microphone type: active ribbon microphone ✔ Polar pattern: figure-8 ✔ Frequency range: approx. 20 Hz – 20 kHz ✔ Sensitivity: approx. 8.3 mV/Pa ✔ Max SPL: approx. 141 dB SPL ✔ Output impedance: approx. 92 Ohm ✔ Power supply: 48 V phantom power ✔ Connector: XLR ✔ Weight: approx. 335 g ✔ Design: large ribbon microphone

AEA R88A Stereo Bändchenmikrofon The new stereo R88A active ribbon microphone with custom toroid transformers captures sound as your ears hear it with an honest, open tonality. The R88A effortlessly records the sonic intricacies of drums, strings, piano, and other instruments that produce complex transients. The extra 12dB of transformer gain is advantageous when recording quiet sources like vocals or soft acoustic guitars. The active impedance buffers help prevent noise interference on long cable runs or when operating near large lighting rigs. The R88A requires standard 48V phantom power to operate. AEA R88A Stereo Ribbon Microphone Features Same award-winning stereo perspective as the passive R88mk2 Phantom powered (48V) version of AEA's classic R88mk2 with 12dB more transformer gain Compatible with any preamp and input impedance Fast, accurate transient reproduction Stereo ribbon microphone that offers a natural sound Captures amazingly precise stereo imagery with a single mic Larger-than-normal ribbon elements handle high SPLs with ease Figure-8, Blumlein Configuration (90 degrees) polar pattern 141dB Max SPL

AEA R88 MK2 Stereo Bändchenmikrofon The new R88 MK2 features the same pure BigRibbon sound in a new shockmount that is easier to position.  The AEA R88 MK2 Stereo Ribbon Microphone is a stereo pair of AEA R84's in one capsule! It utilizes the same basic LRG and acoustic structure as the AEA R44CNE, and delivers that "big ribbon" sound for Stereo applications. Wes Dooley has extensive experience in multi-mic and stereo recording. His experiences in North America, Europe, Africa and New Zealand led him to develop portable recording tools such as multi-channel microphone arrays, MS stereo processors, stereo phase displays and very tall microphone stands. Now he has developed an exceptional stereo ribbon mic! The AEA R88 MK2 is designed to be a higher performance microphone with less internal shielding since it's not intended for close micing situations. The R88 MK2 has been optimized for stereo instrument and ensemble recording. The R88's two ribbon motors are oriented at 90 degrees, and have excellent off-axis frequency response. The R88 MK2 uses the large ribbon configuration of the classic RCA 44 series mics, which gives the mic solid 20Hz bass response and a smooth high end which is flattering to complex tones such as cymbals, strings, and woodwinds. The R88 MK2 is very useful for chamber music, drum overheads, stereo piano pickup, horn sections, and most any coincident stereo pickup application. The high quality passive electronics in the R88 MK2 ensure a huge dynamic range with minimal distortion, but the R88 will sound best with a preamp that has at least 60dB of clean gain, low noise floor (-127dB EIN or better) and input impedance of at least 1.5 kOhm.   The R88 MK2 is minimally protected from wind blasts for the most natural sound quality possible, so a pop filter should be used when making close vocal recordings. The R88 MK2 may be used for both Blumlein stereo and M-S Stereo recording techniques. The mic is finished in Stealth black to reduce visibility in live recording situations, and features an integral shock suspension to reduce noise coupled through the mic stand. AEA R88 MK2 Stereo Ribbon Microphone Features New shock mount suspension for easy positioning Matched pair of Large Ribbon Geometry figure-eight mics for Blumlein or MS stereo 20 hz to 20 kHz response Captive 4 meter cable to two A3M connectors Supplied with a locking angle adapter for flexible positioning Designed to fly overhead for large venue installations Three pounds plus the cable weight 2.5" diameter and 14" tall Black stealth finish Sturdy zippered case AEA R88 MK2 Stereo Ribbon Microphone Specifications Transducers: dual 2" ribbons oriented at 90 degrees Sensitivity: -52dBV/Pa Frequency Response: 20Hz–15kHz (± 3dB) Output Impedance: 270 ohms SPL Handling: 165dB SPL at 1 kHz

AEA NUVO N13 Stereo Set Active Ribbon Microphone System The AEA NUVO N13 Stereo Set is a high-end active ribbon microphone system consisting of two carefully matched N13 microphones, delivered as a precision stereo pair. The N13 is designed as a mid-field ribbon microphone within AEA’s NUVO series, bridging the gap between the close-range N22 and the far-field N8. It is optimized for medium distances (approx. 20 cm to 1 m) and provides a natural, open sound with excellent detail. Its built-in active JFET electronics ensure higher output and excellent compatibility with a wide range of microphone preamps. The stereo kit includes accessories and a case, making it ready for professional stereo recording applications. Sound Character The N13 stereo set delivers an open, detailed and highly articulate sound with outstanding transient response. Low-end: controlled and balanced Mids: clear and natural Highs: unusually bright and detailed for a ribbon mic Compared to traditional ribbon microphones, the N13 offers a slightly brighter tonal balance, making it ideal for capturing fine detail and fast transients. Its reduced proximity effect and mid-field optimization provide a well-balanced mix of direct sound and ambience. Highlights ✔ active stereo ribbon microphone set (matched pair) ✔ optimized for mid-field recording distances ✔ excellent transient response and clarity ✔ brighter ribbon sound with enhanced high-frequency detail ✔ ultra-thin 1.2 µm aluminium ribbon ✔ built-in active JFET electronics (48V phantom power) ✔ reduced proximity effect ✔ high compatibility with various preamps ✔ handcrafted in the USA Typical Applications ✔ drum overheads ✔ strings, brass and ensembles ✔ acoustic guitar and piano ✔ stereo techniques (Blumlein, XY, M/S, AB) ✔ film and broadcast recording ✔ live orchestral and TV production Technical Specifications (per microphone) ✔ Microphone type: active ribbon microphone ✔ Polar pattern: figure-8 ✔ Frequency range: approx. 20 Hz – 20 kHz ✔ Sensitivity: approx. 11.5 mV/Pa ✔ Max SPL: approx. 139 dB SPL ✔ Output impedance: approx. 92 Ohm ✔ Power supply: 48 V phantom power ✔ Ribbon: 1.2 µm aluminium ✔ Weight: approx. 335 g ✔ Design: compact ribbon microphone

AEA N22 Active Ribbon Microphone The AEA N22 is a high-quality active ribbon microphone specifically designed for close-range applications. As part of AEA’s NUVO series, it combines classic ribbon tone with modern engineering and a practical design optimized for short microphone distances. Unlike traditional ribbon microphones, the N22 is tailored for close-miking, making it ideal for studio, live and broadcast environments. Its built-in active JFET electronics provide stable output and excellent compatibility with a wide range of microphone preamps. Sound Character The N22 delivers a direct, warm and detailed ribbon sound with modern clarity. Low-end: tight and controlled Mids: warm, present and natural Highs: clear, lively and slightly enhanced Compared to traditional ribbon microphones, the N22 offers a more modern and brighter tonal balance, making it especially suitable for close-miking. Its reduced proximity effect ensures a balanced sound even at very short distances. Highlights ✔ active ribbon microphone (48 V phantom powered) ✔ optimized for close-miking (approx. 2.5 – 40 cm) ✔ integrated JFET electronics for higher output ✔ 1.8 µm aluminium ribbon ✔ reduced proximity effect for consistent tone ✔ high SPL handling (approx. 141 dB SPL) ✔ fast transient response ✔ versatile for studio, live and broadcast use ✔ handcrafted in the USA Typical Applications ✔ vocals and speech ✔ electric guitar and bass amps ✔ snare, toms and percussion ✔ acoustic instruments (guitar, percussion) ✔ brass and strings (close-miking) ✔ recording in challenging acoustic environments Technical Specifications ✔ Microphone type: active ribbon microphone ✔ Polar pattern: figure-8 ✔ Frequency range: approx. 20 Hz – 20 kHz ✔ Sensitivity: approx. 8.3 mV/Pa ✔ Max SPL: approx. 141 dB SPL ✔ Ribbon: 1.8 µm aluminium ✔ Output impedance: approx. 92 Ohm ✔ Power supply: 48 V phantom power ✔ Connector: XLR ✔ Weight: approx. 335 g ✔ Design: compact ribbon microphone

AEA NUVO N28 Active Stereo Ribbon Microphone The AEA NUVO N28 is a high-end active stereo ribbon microphone that combines two matched ribbon elements in a single compact housing. The microphones are fixed in a Blumlein configuration (90°), enabling instant phase-coherent stereo recording without the need for complex multi-microphone setups. Within the AEA NUVO lineup, the N28 is designed for near- to mid-field applications, offering a flexible and efficient solution for professional stereo recording. Its built-in active electronics ensure consistent output and easy integration with modern microphone preamps. Sound Character The N28 delivers a large, natural and spatially accurate sound with classic ribbon warmth and modern clarity. Low-end: full and round Mids: present and detailed Highs: smooth yet clear Its Blumlein design creates a highly realistic stereo image with excellent depth and spatial definition. Compared to larger stereo ribbon microphones, the N28 offers a more compact and focused sonic presentation. Highlights ✔ active stereo ribbon microphone in a single unit ✔ fixed Blumlein configuration (dual figure-8, 90°) ✔ instant stereo recording without complex setup ✔ dual 1.8 µm aluminium ribbons ✔ precise stereo imaging and phase coherence ✔ compact and easy to position ✔ integrated active electronics (48 V phantom power) ✔ highly practical for fast recording workflows ✔ handcrafted in the USA Typical Applications ✔ drum overheads and room miking ✔ acoustic guitar and piano ✔ orchestral and ensemble recording ✔ quick stereo capture setups ✔ film sound and ambience recording ✔ live and broadcast applications Technical Specifications ✔ Microphone type: active stereo ribbon microphone ✔ Polar pattern: dual figure-8 (Blumlein) ✔ Frequency range: approx. 20 Hz – 20 kHz ✔ Sensitivity: approx. 6.1 mV/Pa ✔ Max SPL: approx. 135 dB SPL ✔ Ribbon: dual 1.8 µm aluminium ✔ Output impedance: approx. 92 Ohm ✔ Connector: XLR-5 (with Y cable to dual XLR) ✔ Power supply: 48 V phantom power ✔ Weight: approx. 400 g ✔ Design: compact stereo ribbon microphone