Stereo-Bass Erweiterungssystem, 2 Subwoofer Tower und 2x 900W Amp
Modern music is increasingly bass-intensive. To pack the maximum amount of energy into the lowest octave – with no surprises in the playback – a sound engineer needs to hear and feel throughout the whole frequency spectrum.
BaseTwo25 low-frequency extension system fits equally well in any composing, mixing, or mastering setup, where correct reproduction and appreciation of the lowest octave is critical. Amphion’s innovative approach to low-frequency monitoring provides producers, sound engineers and artists with a completely new perspective to the base.
The BaseTwo25 is a state-of-the-art monitoring solution converting any Amphion two-way studio monitor into a full-range, time and phase coherent, three-way system. These full-range towers extend all the way down to 20Hz. Each BaseTwo25 has 2 x 25 cm woofers (top) and matching 2 x 25 cm radiators (below) mounted in back to back force-canceling mode on both sides of the cabinet. The system is driven by 2 x 900W amplifier, and controlled by Amphion’s signature filtering module with a variable-level attenuator.
In addition to providing tight, tuneful bass, BaseTwo25 improves midrange clarity and increases the midrange power-handling abilities of the paired monitors. This is achieved by gradually transferring the low-end frequencies from the monitors to the base extenders.
Perfectly integrated time and phase coherent, three-way system, extending all the way down to 20Hz
Extremely robust 25 cm (10”) woofers with matching 25 cm passive radiators mounted in back to back force canceling mode on both sides of the cabinet3
Driven by 2 x 900W amplifiers housed in a 2U rack chassis and a stand-alone 1U filtering module with variable-volume control
Operating principle: One-way, passive radiator
Drivers: 10”aluminium woofers with 10″ passive radiators
Crossover point: 100 Hz
Frequency response: 20 – 100 Hz ±3dB
Power rating: 2 x 900W RMS, 4 ΩW
Weight: 70 kg (154 lbs)
Handmade in Finland
Dynamic range: 115 dB
Mains: Input voltage 230/115V, autoselect
Inputs: 2x Neutrik XLR inputs
Speaker connectors: 3-way binding posts (banana, bare wire or spades)
Casing: 19” rack mountable (2U) high quality aluminium