Bettermaker Mastering Compressor  Analoger 19“ VCA Stereo Mastering-Kompressor mit USB-Konnekt und digitaler Steuerung Features des BETTERMAKER MASTERING COMPRESSORS: advanced analog VCA compressor with PEAK or RMS detection and switchable forward/backward feed all parameters are digitally controlled via front panel and/or DAW (with dedicated plugin) stereo, dual-mono and mid/side operation modes with with focus and sidechain preview function our famous BM, SG and DX modes adjustable 15 – 30 Hz high pass filter at the compressor input dry/wet MIX control for parallel compression HPF, LPF and fully configurable parametric filter in sidechain with option of hardware insert adjustable drive (for odd/even clipper) and THD function for harmonically rich sound Range Setting – limit the maximum amount of gain reduction! on-board measurement of PEAK/RMS levels 100% analog audio signal path total recall and A/B comparison five inch capacitive touchscreen with backlight USB connectivity with MAC/PC

Bettermaker Mastering Equalizer Analoger Stereo Mastering EQ mit digitaler Steuerung für 100% Total Recall und Automation 19“ Stereo-Mastering EQ mit 100% analogem Soundpfad und digitaler Steuerung per DAW-Plugin oder integriertem Touchscreen, echtem Total Recall und Automationen. Features des BETTERMAKER MASTERING EQ EQUALIZERS: 100% analog audio signal path  USB connectivity with MAC/PC all parameters are digitally controlled via touchscreen and/or DAW (with dedicated plugin) 399 presets with unique names, total recall, A/B comparison 5-inch capacitive touchscreen with backlight, four encoders with push-button action for ease of control stereo, dual-mono and mid/side operation modes with focus function stereo 12 or 24dB/oct high-pass filter with adjustable cutoff frequency (10Hz – 240 Hz; extended to 6Hz with the resonance enabled) four stereo parametric filters with 15dB boost/cut range, variable Q (0.2 – 7): EQ1: 22Hz – 470Hz (bell/shelf) EQ2: 90Hz – 2kHz (bell) EQ3: 480Hz – 10kHz (bell) EQ4: 1kHz – 23kHz (bell/shelf) stereo passive equalizer with extended hi-boost section (air bands: 20 and 28 kHz) stereo, 12dB/oct low-pass filter with adjustable cutoff frequency (2 – 38 kHz) adjustable output level (+/- 10dB) Frequency Search, Gain Lock, Note and Auto-Q functions on-board measurement of PEAK/RMS levels and RTA analyzer on-screen live representation of the equalization curve Technische Spezifikationen des BETTERMAKER MASTERING EQs (all filters enabled, set flat):  Frequency response 20Hz to 20kHz (+/- 0.2 dB) Dynamic range: 128 dB @ +18 dBu, 20 kHz BW THD+N: 0.03% @ +4 dBu, 0.06% @ +18 dBu, 20 kHz BW CMRR: max 85 dB @ 3 kHz, min 52 dB @ 20Hz, 20 kHz BW Crosstalk: min -100 dB @ 30Hz, max -65 dB @ 20kHz, +18 dBu, 20 kHz BW balanced stereo input (XLR), 23dBu max input level (THD < 0.2%) balanced stereo output (XLR), 23dBu max output level (THD < 0.2%) Operating Level: +4dBu Input impedance (differential): 48kΩ (for balanced signal) Output Impedance: 50Ω + 50Ω (electronically balanced) 2U enclosure, 230mm deep 115/230V switch advanced linear power supply with toroidal AC mains transformer Maximum power consumption: 20W Shipping weight: 5.5 kg

Bettermaker Mastering Limiter V2.0 The Bettermaker Mastering Limiter has been the go-to tool for Mix and Mastering engineers in the pro audio industry for over 7 years. Now, the Bettermaker Mastering Limiter has gotten even better, more powerful, and more intuitive with the introduction of the Bettermaker Mastering Limiter V2.0. The team at Bettermaker has spent countless hours of research and development to bring you the ultimate mastering tool for music production. The new Bettermaker Mastering Limiter V2.0 is packed with added new mastering features, a totally redesigned control screen and plugin, and presets from pro audio legends. With this new version, you can take your music to the next level and give it that final touch that it deserves. One of the biggest changes in the Bettermaker Mastering Limiter V2.0 is the redesigned control screen and plugin. The new interface is more intuitive and user-friendly, making it easier to navigate and control the limiter. You can now control and tweak your music more precisely, allowing you to achieve the perfect sound you are looking for. Moreover, the new version comes with additional mastering features that give you more control over your music. These features include a side-chain, M/S processing, and a new metering system, allowing you to monitor your music more closely. With the Bettermaker Mastering Limiter V2.0, you can also access presets from pro audio legends, making it easier to achieve the sound you want. The presets have been carefully curated by experts in the industry, so you can be confident that they will give you the results you desire. In summary, the Bettermaker Mastering Limiter V2.0 is the ultimate tool for mastering engineers. With its added new features, redesigned control screen and plugin, and presets from pro audio legends, you can take your music to the next level and give it the final touch that it deserves. Don't hesitate to try out this powerful tool for your next music project. Now, let’s look closer at what is new: -New upgraded Limiter Engine-New intuitive GUI and DAW plugin-Wide angle, high contrast screen-Limiter sidechain with highpass filter and high frequency emphasis-Limiter gain reduction range-New, redesigned Clipper section-Faster release time-Redesigned color section with color MS matrix-Input/Output link

Bettermaker Stereo Passive Equalizer Bettermaker® Stereo Passive Equalizer (SPE) is for those who seek outstanding EQ quality with the convenience of fast and precise recall and automation. SPE offers 100% signal path of legendary Passive filters. All this with mastering grade sound and patented recall with a speed of a native plugin. 100% analog audio signal path USB connectivity with MAC/PC all parameters are digitally controlled by DAW (with dedicated plugin) stereo passive equalizer with extended hi-boost section (air bands: 20 and 28 kHz) adjustable output level (+/- 8dB) Digital Section The sound of the Stereo Passive Equalizer is of course based on the quality of its analog filters, precisely matched capacitors and inductors. But all the control and user interactions are performed in the digital domain. This allows us to incorporate options and possibilities not found in any standard analog equalizers: Instant reset of all parameters Rapid, precise and repeatable adjustments Precisely linked stereo operation with the ease of a single control DAW automation and recall of all available parameters   The digital section of the Stereo passive Equalizer is based around high speed, 32-bit micro-controller, with dedicated firmware programmed into its memory (with the possibility of updating the firmware via USB connection). It controls the parameters af analog filters, watches over the user interface, USB connectivity and other SPE functions. DAW integration The Bettermaker Streo Passive Equalizer can communicate with your DAW via USB connection.The unit appears as a HID device and can be managed via Bettermaker Stereo Passive Equalizer PluginTechnical specification (all filters enabled, set flat) Maximum input level: +24 dBu (balanced with 48kΩ input impedance)
 Maximum output level: +27 dBu (balanced with 50Ω + 50Ω output impedance)
 Nominal audio level: +4 dBu
- Frequency response: 7 Hz – 30kHz (-0.5 dB, ISO-R40 sweep)
 Frequency flatness: +/- 0.2 dB (20Hz – 20kHz, ISO-R40 sweep)
 Dynamic range: 101 dB (20kHz bandwidth, +24dBu)
 THD+N ratio: 0.009 % (20kHz bandwidth, +4dBu, 1kHz)
 THD ratio: 0.0025 % (+4dBu, 1kHz)
- CMRR: > 70dB (20Hz – 20kHz, IEC 60268-3)
 Crosstalk: > 88dB (20Hz – 20kHz, +18dBu, channel to channel)
 Max LF boost: 15 dB (set to 100 Hz)
 Max LF cut: 16 dB (set to 100 Hz)
 Max HF boost: 18 dB (all frequencies)
 Low boost/cut frequencies: 20, 30, 60, 100 Hz
 High boost frequencies: 3, 4, 5, 6, 8, 10, 12, 16, 20, 28 kHz
 High cut frequencies: 5, 10, 20 kHz
 Control Resolution: 101 steps (Lo Boost, Lo Cut, Hi Boost, Bandwidth) & 34 steps (Hi Cut)
 Output gain: +/- 8 dB (0.1 dB resolution)
 Unit height: 2U
 Depth: 140 mm
 AC power consumption: 15W (2W in standby, with included 100-240VAC power adapter)

Bettermaker VSPE Introducing the VSPE: Vacuum Stereo Passive Equalizer Discover the groundbreaking VSPE, an audio innovation that seamlessly merges the timeless warmth of vacuum tube technology with the precision of digital control. After years of meticulous development and testing, this revolutionary product is set to transform your sound experience. Leveraging our Grammy award-winning expertise in studio processors, we've crafted a fully analog passive equalizer with authentic vacuum tube and transformer circuitry. Additionally, our design includes handcrafted audio transformers from Bettermaker for unmatched quality and performance. Passive equalizers are known for delivering a warm, rounded low end and airy high-frequency range. With the VSPE, these qualities are enhanced by the unique character of vacuum tubes and transformers—creating our signature sound, HEAT. Our innovative design allows you to easily balance between the pristine clarity of vacuum tubes and the lush saturation of transformers with the touch of a button. Seamless integration with our plugin and DAW provides quick recall and automation of settings. The new VSPE plugin extends versatility, enabling you to control and automate all parameters within your DAW while auditioning high and low frequencies separately. Additionally, stereo and dual-mono modes open up a world of possibilities. Our plugin also offers mastering-grade digital high-pass and low-pass filters, perfect for precisely shaping your low and high ends. Whether recording, tracking, producing, mixing, or mastering, the VSPE delivers exceptional flexibility and sonic character in one sophisticated package. Experience the best of both worlds with the VSPE: vintage warmth meets cutting-edge technology. Technical specification:  Maximum input level: +24 dBu (balanced with 48kΩ input impedance)  Maximum output level: +22 dBu Output impedance: 120Ω (30Ω with HEAT activated - transformer balanced) Nominal audio level: +4 dBu Max LF boost: 15 dB (set to 100 Hz) Max LF cut: 16 dB (set to 100 Hz) Max HF boost: 18 dB (all frequencies) Low boost/cut frequencies: 20, 30, 60, 100 Hz High boost frequencies: 3, 4, 5, 6, 8, 10, 12, 16, 20, 28 kHz High cut frequencies: 5, 10, 20 kHz Control Resolution: 101 steps (Lo Boost, Lo Cut, Hi Boost, Bandwidth) & 34 steps (Hi Cut) Control Resolution in Quantize mode: 17 steps for all controls Output gain: +/- 8 dB (0.1 dB resolution; 1 dB in Quantize mode) Unit height: 2U Unit depth: 140 mm Unit weight without cables and PSU: 2.7kg AC power consumption: 18W (2W in standby, with included 100-240VAC power adapter) Shipping weight & dimensions: 3.5kg, 60x30x20 cm