BAE Audio 1023 mit Netzteil The 1023 is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and high sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz. Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz. Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz. High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz. EQ Button: Switches the equaliser on or off Phase Button: 180º

BAE Audio 1028 mit Netzteil 1028 Mic Pre/EQ Rackmount & Module The 1028 is completely hand-wired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and hi sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. The 1028 includes the same low pass filter as the 1084, giving it 28 frequencies. Features High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz. Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz. High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz. Low Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz. EQ Button: Switches the equaliser on or off Phase Button: 180º

BAE Audio 1073 mit Netzteil The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire. The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.  Features 1073 BAE: High Frequency: +/-16dB fixed frequency shelving at 12kHz Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz. Mid Range: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

BAE Audio 1073 MP Dual Channel mit Netzteil This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids. A transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones. There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments. As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth. All Class A, transformer-coupled design in a 19" 1U chassis. Line level XLR inputs for extra versatility as a line preamp. High impedance DI for guitar and synth.  The same Class A components as the 1073 and 1084. Illuminated phase reverse and phantom power pushbuttons. Input impedance selector switch between 1200 and 300 ohms. Same modular design and hand-wiring BAE is known for. Regulated linear power supply will run up to four channels.

BAE Audio 1073 MP mit Netzteil This is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids. A transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones. There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments. As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth. All Class A, transformer-coupled design in a 19" 1U chassis. Line level XLR inputs for extra versatility as a line preamp. High impedance DI for guitar and synth.  The same Class A components as the 1073 and 1084. Illuminated phase reverse and phantom power pushbuttons. Input impedance selector switch between 1200 and 300 ohms. Same modular design and hand-wiring BAE is known for. Regulated linear power supply will run up to four channels.

BAE Audio 1073 MPF Dual Channel mit Netzteil This is the high-pass filter version of the 1073MP. The 1073MPF is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids. A transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones. There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.  As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth. All Class A, transformer-coupled design in a 19" 1U chassis. Inductor based high pass filter Line level XLR inputs for extra versatility as a line preamp. High impedance DI for guitar and synth.  The same Class A components as the 1073 and 1084. Illuminated phase reverse and phantom power pushbuttons. Input impedance selector switch between 1200 and 300 ohms. Same modular design and hand-wiring BAE is known for. Regulated linear power supply will run up to four channels.

BAE Audio 1073 MPF Single Channel mit Netzteil This is the high-pass filter version of the 1073MP. The 1073MPF is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids. A transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones. There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.  As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth. All Class A, transformer-coupled design in a 19" 1U chassis. Inductor based high pass filter Line level XLR inputs for extra versatility as a line preamp. High impedance DI for guitar and synth.  The same Class A components as the 1073 and 1084. Illuminated phase reverse and phantom power pushbuttons. Input impedance selector switch between 1200 and 300 ohms. Same modular design and hand-wiring BAE is known for. Regulated linear power supply will run up to four channels.

BAE 1084 mit Netzteil The BAE 1084 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire. The BAE 1084 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry. High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz. Mid Range: +/-12dB or +/-18dB peaking with switchable 'High Q', selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz. High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz EQ Button: Switches the equaliser on or off Phase Button: 180º